Includes Everything Pictured:
Tow Custom Harness, 7-Way, w/Circuit Protected ModuLite® HD Module
Mounting Bracket, 7-Way OEM Connectors, Includes Screws and Nuts
Primus® IQ, Proportional Brake Controller for Trailers with 1-3 Axles, Gray
Trailer Brake Controller Custom Harness, Vehicle & Brake Control Ends
Installation Hardware (if required)
Installation Instructions (if required)
Installation Schematics & Diagrams (if required)
This Trailer Wiring Harness Fits The Following Vehicles:
- 2014 - 2020 Acura MDX All Models
TEKONSHA 118289 Tow Custom Harness, 7-Way, w/Circuit Protected ModuLite® HD Module (QTY 1)
Manufactured by: Tekonsha
Tekonsha® Tow Harnesses are the replacement for your factory electrical connector to the back of your vehicle These harnesses are used to link the wiring from your vehicle to the trailer when towing Tekonsha Tow Harnesses feature custom designs to fit each vehicle make and model based on manufacturer specifications.
Plus, the Plug & Play connectors on the end of the wires make it easy to install No cutting or splicing!Tekonsha offers the largest, most complete line of Replacement Tow Harnesses Hit the road with the peace of mind only Tekonsha can provide.
Life's a Journey Stop Often..
• Mounts electrical connector to attachment bracket• Includes screws and nuts• Attractive point-of-purchase packaging(QTY 1)
Manufactured by: Tow Ready
Mounting Bracket, 7-Way OEM Connectors, Includes Screws and Nuts.
Features:
- Mounts electrical connector to attachment bracket
- Attractive point-of-purchase packaging
- Finish: Black Powder Coat
- Clamshell packaging
TEKONSHA 90160 Primus® IQ, Proportional Brake Controller for Trailers with 1-3 Axles, Gray (QTY 1)
Manufactured by: Tekonsha
The Tekonsha Primus IQ electric trailer brake controller gives you dependable braking power in a compact design As an industry staple for more than ten years, this proportional braking system provides a smooth braking response in any stopping situation With its petite yet durable exterior, this trailer brake controller fits nicely under the dash, making it easily accessible from the driver’s seat without being in the way.
While also compact, the brains of the Primus IQ are astute This insightful brake controller has an easy-to-read LED display, self-diagnostic check to monitor your connection and trailer braking activity and is self-leveling when mounted within a 90-degree vertical range, so there’s no need to adjust the unit once it’s installed It also features a power output knob to set your desired braking power, a boost option that lets you apply up quickly and easily to three levels of additional trailer braking power, especially when hauling heavier loads, and manual override.
The Primus IQ was created to work with electric braking systems, works proportionally in reverse to make backing into tough spots a bit easier, and - like the Prodigy P3, Prodigy P2, and many other Tekonsha brake controllers – utilizes primary sensor technology to ensure the smoothest stop possible When you’re done towing, the IQ’s snap-in dash mounting clip, Plug & Play port for two plug adapters, and removeable electrical connector allow the unit to be quickly stored The Primus IQ is truly a complete trailer brake controller kit.
It works with trailers with 1-3 axles, comes with all necessary mounting hardware, and is backed by a limited lifetime warranty..
TEKONSHA 302800 Trailer Brake Controller Custom Harness, Vehicle & Brake Control Ends (QTY 1)
Manufactured by: Tekonsha
Tekonsha trailer brake controller harnesses exist to make connecting your brake controller to your vehicle as easy as possible These custom two-plug units are specifically designed to be used with any Tekonsha brake controller The Plug & Play feature on the Tekonsha wiring harnesses makes them easy to install.
Simply plug one end of the harness into the back of your desired Tekonsha brake controller and the other end into the port in your vehicle No cutting, splicing, or taping required.Each wiring harness is made up of four copper wires wrapped with a braided nylon thread to insulate the wires and protect them against nicks, punctures, and elevated temperatures The four-pin Plug & Play connectors on each end of the harness are uniquely designed, with one end to fit each vehicle based on make and model year specifications, while the other end plugs easily into any Tekonsha brake controller.Tekonsha trailer brake controller harnesses are custom designed, giving you plenty of wire to reach between where it is connected to the vehicle and where it connects to the brake controller without stretching or straining the wires.
And because Tekonsha is the leader in wiring and electrical, you can relax knowing your connections will be safe and secure, so you can hit the road with confidence! With Tekonsha, Life’s a Journey Stop Often..
List of Fitment Years:
2020, 2019, 2018, 2017, 2016, 2015, 2014
Hitches Near Me: We operate out of several warehouses across the country, ensuring faster delivery to your location.
Order today or message us for more information
