HitchExpo Logo
Trailer Hitch , 7-Way , Tekonsha Brake EVN Control
TowingTrailer HitchHitch with 7-Way Plug and Brake Control

Reese Trailer Hitch + 7-Way Wiring + Tekonsha Brake EVN Control For 92-94 Ford Econoline Van All Exc Shuttle Bus RE 76KC

$720.91
SKU: RE76KC
Checking compatibility...
1
Out of Stock
Includes Everything Pictured:
Class 4 Trailer Hitch, 2 Inch Square Receiver, Black
T-One® T-Connector Custom Harness, 4-Way Flat, w/Converter
Wiring Adapter, 7-Way Flat to 4-Way Flat
Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only
Circuit Breaker, 30 Amp
BRAKE-EVN™ Proportional Brake Controller for Trailers with 1-4 Axles, Black
Trailer Brake Controller Custom Harness, Vehicle & Brake Control Ends
Installation Hardware (if required)
Installation Instructions (if required)
Installation Schematics & Diagrams (if required)

This Trailer Hitch Fits The Following Vehicles:

  • 1992 - 1994 Ford Econoline Van All Except Shuttle Bus

REESE TOWPOWER 96906 Class 4 Trailer Hitch, 2 Inch Square Receiver, Black (QTY 1)

Manufactured by: Reese Towpower

REESE® Class 4 trailer hitches are the perfect mix of style and strength to get you and your equipment wherever you need to go This REESE Class 4 receiver hitch is rated for up to 10,000 lbs gross trailer weight (GTW) and up to 1,000 lbs.

tongue weight (TW) They are also suitable for use with weight distribution up to 12,000 lbs weight distribution (WD) and 1,200 lbs.

weight distribution tongue weight (WDTW) REESE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion The Class 4 trailer hitch has a 2 inch square receiver tube opening, allowing you to attach accessories like a bike rack or cargo carrier, or hook up your pop-up, boat trailer, or utility trailer.

Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty REESE trailer hitches are tested to exceed V-5 and SAE J684 standards REESE: Helping you enjoy the journey as much as the destination..

TEKONSHA 118343 T-One® T-Connector Custom Harness, 4-Way Flat, w/Converter (QTY 1)

Manufactured by: Tekonsha

Tekonsha® T-One® connector (also referred to as T-Connector) wiring harnesses are the fastest and easiest way to add an electrical connector to the back of your vehicle These connectors are used to link the wiring from your vehicle to the trailer when towing Tekonsha T-One connectors feature custom designs to fit each vehicle make and model based on manufacturer specifications.

Plus, the Plug & Play connectors on the end of the wires make it easy to install No cutting or splicing!Tekonsha offers the largest, most complete line of T-One connectors To install a Tekonsha T-One wiring harness, simply locate your vehicle's wiring harness connector typically behind the vehicle taillight - unplug the connection and insert the T-Connector into the vehicle's harness.

It's that easy! So what are you waiting for? Hit the road with the peace of mind only Tekonsha can provide Life's a Journey Stop Often..

REESE TOWPOWER 85343 Wiring Adapter, 7-Way Flat to 4-Way Flat (QTY 1)

Manufactured by: Reese Towpower

REESE Towpower dual port adapter offers the most convenient way to up-grade your vehicle from a standard 4-way flat connector to have both the versatility of a 4-way flat along with the capabilities of the 7-way round connector The simple wiring converts the vehicle's 4-way flat to a flexible, two port connector, offering both the 4-way flat, 7-way round connector..

TOW READY 20506 Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only (QTY 1)

Manufactured by: Tow Ready

Includes all necessary parts required to completely install all brake controls No other parts are necessary..

Used in 6, 12 and 24V DC applications. Automotive, R.V., air conditioners, battery chargers, any application requiring over-current protection. Non-corrosive molded cover eliminates grounding when operating against a fault line. Includes mounting bracket and installed nuts and washers.(QTY 1)

Manufactured by: Tekonsha

Used in 6, 12 and 24V DC applications Automotive, R.V., air conditioners, battery chargers, any application requiring over-current protection Non-corrosive molded cover eliminates grounding when operating against a fault line.

Includes mounting bracket and installed nuts and washers..

Features:

  • Current rating: 30 Amp
  • Number of terminals: 2
  • Voltage compatibility: 6 V, 12 V, 24 V
  • Terminal type: Threaded
  • Terminal gender: Male

TEKONSHA 8508220 BRAKE-EVN™ Proportional Brake Controller for Trailers with 1-4 Axles, Black (QTY 1)

Manufactured by: Tekonsha

The BRAKE-EVN electric brake controller offers top-notch trailer braking when you need it most This superlative proportional brake controller utilizes patented braking sensor technology and advanced electronics to provide a smooth braking response in any stopping situation The BRAKE-EVN has easy-to-use arrow buttons so you can effortlessly set the power output to your desired braking power, a boost feature that lets you apply up to three levels of additional braking power, especially when hauling heavier loads, and manual override to help you brake safely when an unexpected stop pops up.

The BRAKE-EVN also has a digital LED display so you can monitor your settings and trailer braking activity, a power-save mode to reduce battery drain when not in use, and a compact design, making it easily accessible from the driver’s seat The Tekonsha BRAKE-EVN trailer brake controller works with 1-4 axle trailers, has a Plug & Play feature that allows for quick and easy connection with your vehicle’s wiring, comes with all the mounting hardware needed for installation, and is backed by a five-year limited warranty..

TEKONSHA 303500 Trailer Brake Controller Custom Harness, Vehicle & Brake Control Ends (QTY 1)

Manufactured by: Tekonsha

Tekonsha trailer brake controller harnesses exist to make connecting your brake controller to your vehicle as easy as possible These custom two-plug units are specifically designed to be used with any Tekonsha brake controller The Plug & Play feature on the Tekonsha wiring harnesses makes them easy to install.

Simply plug one end of the harness into the back of your desired Tekonsha brake controller and the other end into the port in your vehicle No cutting, splicing, or taping required.Each wiring harness is made up of four copper wires wrapped with a braided nylon thread to insulate the wires and protect them against nicks, punctures, and elevated temperatures The four-pin Plug & Play connectors on each end of the harness are uniquely designed, with one end to fit each vehicle based on make and model year specifications, while the other end plugs easily into any Tekonsha brake controller.Tekonsha trailer brake controller harnesses are custom designed, giving you plenty of wire to reach between where it is connected to the vehicle and where it connects to the brake controller without stretching or straining the wires.

And because Tekonsha is the leader in wiring and electrical, you can relax knowing your connections will be safe and secure, so you can hit the road with confidence! With Tekonsha, Life’s a Journey Stop Often..


List of Fitment Years:

1994, 1993, 1992
Hitches Near Me: We operate out of several warehouses across the country, ensuring faster delivery to your location.

Order today or message us for more information

Loading fitment data...