Reese POD Electric Trailer Brake Control w/ 7-Way Wiring Kit For 2001 Ford Explorer 2Dr Sport w/ OEM Wiring RE43VK

TEKONSHA 118241 Tow Custom Harness, 4-Way Flat (QTY 1)

Manufactured by: Tekonsha

Tekonsha® Tow Harnesses are the replacement for your factory electrical connector to the back of your vehicle These harnesses are used to link the wiring from your vehicle to the trailer when towing Tekonsha Tow Harnesses feature custom designs to fit each vehicle make and model based on manufacturer specifications.

Plus, the Plug & Play connectors on the end of the wires make it easy to install No cutting or splicing!Tekonsha offers the largest, most complete line of Replacement Tow Harnesses Hit the road with the peace of mind only Tekonsha can provide.

Life's a Journey Stop Often..

REESE TOWPOWER 7418411 Wiring Adapter, 4-Way Flat to 7-Way, Round Car End (QTY 1)

Manufactured by: Reese Towpower

The REESE Towpower pre-wired round blade 7-way connector, provides versatility in going from a 4-way flat to a 7-way standard plug The 7-way connectors include electric brake, auxiliary, and backup circuits..

The REESE Towpower Trailer Brake Wiring Kit contains everything needed to install a brake control in any vehicle that is not pre-wired for a brake controller. The trailer brake control kit includes all wires going to both the battery and the wires needed to go to the connector located at the rear of the vehicle. The kit includes everything necessary to completely install all brake controls: (20) Zip Ties; (4) Butt Splices; (1) Ring Connector 3/8-inch; (1) 12 Gauge Black Wire 15 Feet; (1) 12 Gauge White Wire 15 Feet; (1) 12 Gauge Blue Wire 25 Feet; (1) 16 Gauge Red Wire 3 Feet; (1) Blue Splice Connector; (1) Fuse Holder; (1) 20 Amp Fuse. The REESE Trailer Brake Controller Wiring Kit comes with a limited 1-year warranty. Pioneering performance since 1952, REESE is the industry-leading designer and manufacturer of innovative towing solutions. (QTY 1)

Manufactured by: Reese Towpower

This complete REESE Towpower brake control installation kit contains everything needed to install a brake control in any vehicle that is not pre-wired for a brake controller This kit includes all wires going to both the battery and the wires needed to go to the connector located at the rear of the vehicle..

Features:

• Complete trailer brake controller installation kit with wiring harness
• UPC: 042899850601

• Mounts electrical connector to attachment bracket• Includes screws and nuts• Attractive point-of-purchase packaging(QTY 1)

Manufactured by: Tow Ready

Mounting Bracket, 7-Way OEM Connectors, Includes Screws and Nuts.

Features:

• Mounts electrical connector to attachment bracket
• Attractive point-of-purchase packaging
• Finish: Black Powder Coat
• Clamshell packaging

REESE TOWPOWER 74377 POD® Trailer Time-Delay Brake Controller for Trailers with 1-2 Axles (QTY 1)

Manufactured by: Reese Towpower

The REESE Pod trailer brake controller provides safety and connection between your tow vehicle and trailer As a time-based controller, the Pod is a great choice for basic, light-duty towing needs This economical controller works by electronically connecting your vehicle and your trailer.

When you hit the brakes in your tow vehicle, it generates an output signal that ramps up, or increases over a period of time, applying braking power to your trailer at a fixed rate The Pod has easy-to-reach buttons so you can adjust power output, monitor the power output to the brakes, and engage manual override to help you brake safely when an unexpected stop pops up Because the Pod is a time-based trailer brake controller kit, there’s no requirement that it be positioned in the direction of travel; it can be installed anywhere you like as long as it is within reach of the driver.

Plus, the Plug & Play feature allows for quick and easy connection with your vehicle’s wiring The Pod trailer brake controller works with 1-2 axle trailers, comes with all the mounting hardware needed for installation, and is backed by a limited 1-year warranty.

TEKONSHA 303500 Trailer Brake Controller Custom Harness, Vehicle & Brake Control Ends (QTY 1)

Manufactured by: Tekonsha

Tekonsha trailer brake controller harnesses exist to make connecting your brake controller to your vehicle as easy as possible These custom two-plug units are specifically designed to be used with any Tekonsha brake controller The Plug & Play feature on the Tekonsha wiring harnesses makes them easy to install.

Simply plug one end of the harness into the back of your desired Tekonsha brake controller and the other end into the port in your vehicle No cutting, splicing, or taping required.Each wiring harness is made up of four copper wires wrapped with a braided nylon thread to insulate the wires and protect them against nicks, punctures, and elevated temperatures The four-pin Plug & Play connectors on each end of the harness are uniquely designed, with one end to fit each vehicle based on make and model year specifications, while the other end plugs easily into any Tekonsha brake controller.Tekonsha trailer brake controller harnesses are custom designed, giving you plenty of wire to reach between where it is connected to the vehicle and where it connects to the brake controller without stretching or straining the wires.

And because Tekonsha is the leader in wiring and electrical, you can relax knowing your connections will be safe and secure, so you can hit the road with confidence! With Tekonsha, Life’s a Journey Stop Often..