Manufactured by: Reese Towpower
The REESE Towpower electrical 4-Flat wiring kit is designed for the vehicle end, and includes 48 In of wire with splice connectors The included splices connectors make adding a 4-flat connector easy for most vehicle wiring systems..
Manufactured by: Reese Towpower
The REESE Towpower pre-wired round blade 7-way connector, provides versatility in going from a 4-way flat to a 7-way standard plug The 7-way connectors include electric brake, auxiliary, and backup circuits..
Manufactured by: Reese Towpower
This complete REESE Towpower brake control installation kit contains everything needed to install a brake control in any vehicle that is not pre-wired for a brake controller This kit includes all wires going to both the battery and the wires needed to go to the connector located at the rear of the vehicle..
Manufactured by: Tow Ready
Mounting Bracket, 7-Way OEM Connectors, Includes Screws and Nuts.
Manufactured by: Reese Towpower
The Tekonsha Brakeman IV digital trailer brake controller provides safety and connection when you need it most As a time-based controller, the Brakeman IV is a great choice for basic towing needs This compact controller works by electronically connecting your vehicle and your trailer.
When you hit the brakes in your tow vehicle, it generates an output signal that ramps up, or increases over a period of time, applying braking power to your trailer at a fixed rate The Brakeman IV has up-front buttons so you can easily adjust power output, sync (the time it takes for the brakes fully engage) which is the aggressiveness with which the controller applies the brakes, and engage manual override to help you brake safely when an unexpected stop pops up Because the Brakeman IV is a time-based controller, there’s no requirement that it be positioned in the direction of travel; it can be installed anywhere you like as long as it is within reach of the driver.
Plus, the Plug & Play feature allows for quick and easy connection with your vehicle’s wiring The Brakeman IV trailer brake controller works with1-4 axle trailers, comes with all the mounting hardware needed for installation, and is backed by a limited lifetime warranty..
Manufactured by: Tekonsha
Tekonsha trailer brake controller harnesses exist to make connecting your brake controller to your vehicle as easy as possible These custom two-plug units are specifically designed to be used with any Tekonsha brake controller The Plug & Play feature on the Tekonsha wiring harnesses makes them easy to install.
Simply plug one end of the harness into the back of your desired Tekonsha brake controller and the other end into the port in your vehicle No cutting, splicing, or taping required.Each wiring harness is made up of four copper wires wrapped with a braided nylon thread to insulate the wires and protect them against nicks, punctures, and elevated temperatures The four-pin Plug & Play connectors on each end of the harness are uniquely designed, with one end to fit each vehicle based on make and model year specifications, while the other end plugs easily into any Tekonsha brake controller.Tekonsha trailer brake controller harnesses are custom designed, giving you plenty of wire to reach between where it is connected to the vehicle and where it connects to the brake controller without stretching or straining the wires.
And because Tekonsha is the leader in wiring and electrical, you can relax knowing your connections will be safe and secure, so you can hit the road with confidence! With Tekonsha, Life’s a Journey Stop Often..
Order today or message us for more information