Manufactured by: Draw-Tite
DRAW-TITE® Class 5 trailer hitches are the choice of professionals and big toy haulers who need to get the job done! These Class 5 heavy-duty hitches are rated for up to 12,000 lbs gross trailer weight (GTW) and up to 1,200 lbs tongue weight (TW).
They are also suitable for use with weight distribution up to 14,000 lbs weight distribution (WD) and 1,700 lbs weight distribution tongue weight (WDTW).
DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion The 2-1/2 inch square receiver tube opening, bigger chain loops, tighter ball mount fit, and reinforced pin holes make these heavy-duty hitches ideal for toy haulers and commercial vehicles alike Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty.
DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards DRAW-TITE: North America’s Favorite Hitch..
Manufactured by: Tow Ready
The Tow Ready 7-Way Connector Harness (Part Number 20147) provides a reliable vehicle-end wiring solution for trailers Measuring 18.25 inches in length, this harness features standard 7-way RVIA clocking, ensuring compatibility with all models The flex tubing design offers enhanced durability and protection for the wiring.
Packaged in a clamshell, it’s easy to handle and install Backed by a limited 3-year warranty, this connector harness is built for long-lasting performance Made in Mexico, it meets quality standards for secure trailer connections, making it an essential addition to your electrical wiring setup..
Manufactured by: Reese Towpower
REESE Towpower electrical T- Connector designed to fit a multitude of today's models offering both a 7-Way connector and a 4-Flat connector The connector is designed to be inserted into the vehicles wiring harness to facilitate a quick and easy plug in installation Easy to follow, detailed instructions are included with every T-Connector to make the installation process as smooth and trouble-free as possible.
Check the fitment guide to see if it fits your model vehicle..
Manufactured by: Tekonsha
The Tekonsha Prodigy P2 electric trailer brake controller is a small device with a big responsibility As one of the most popular and most trusted brake controllers on the market, this proportional brake controller utilizes primary sensor technology to provide a smooth braking response in any stopping situation The Prodigy P2 has an easy-to-use knob so you can effortlessly set the power output to your desired braking power, a boost feature that lets you apply up to three levels of additional braking power, especially when hauling heavier loads, the choice of electric or electric over hydraulic braking, and manual override to help you brake safely when an unexpected stop pops up.
The P2 also has an LED digital display so you can monitor your settings and trailer braking activity and a power-save mode to reduce battery drain when not in use This intuitive brake controller can easily be positioned on top of or under the dash, with your choice of a mounting bracket or mounting pocket and is self-leveling when mounted within a 90-degree vertical range, so there’s no need to adjust the unit once it’s installed When you’re done towing, the P2’s snap-in dash mounting clip, Plug & Play port for two plug adapters, and removeable electrical connector allow the unit to be quickly stored.
The Prodigy P2 truly is a complete trailer brake controller kit It works with trailers with 1-4 axles, comes with all the mounting hardware needed for installation, and is backed by a limited lifetime warranty..
Manufactured by: Tekonsha
Tekonsha trailer brake controller harnesses exist to make connecting your brake controller to your vehicle as easy as possible These custom two-plug units are specifically designed to be used with any Tekonsha brake controller The Plug & Play feature on the Tekonsha wiring harnesses makes them easy to install.
Simply plug one end of the harness into the back of your desired Tekonsha brake controller and the other end into the port in your vehicle No cutting, splicing, or taping required.Each wiring harness is made up of four copper wires wrapped with a braided nylon thread to insulate the wires and protect them against nicks, punctures, and elevated temperatures The four-pin Plug & Play connectors on each end of the harness are uniquely designed, with one end to fit each vehicle based on make and model year specifications, while the other end plugs easily into any Tekonsha brake controller.Tekonsha trailer brake controller harnesses are custom designed, giving you plenty of wire to reach between where it is connected to the vehicle and where it connects to the brake controller without stretching or straining the wires.
And because Tekonsha is the leader in wiring and electrical, you can relax knowing your connections will be safe and secure, so you can hit the road with confidence! With Tekonsha, Life’s a Journey Stop Often..
Order today or message us for more information