Manufactured by: Draw-Tite
DRAW-TITE® Class 3 trailer hitches are the perfect mix of style and strength to get you and your equipment wherever you need to go This DRAW-TITE Class 3 receiver hitch is rated for up to 4,500 lbs gross trailer weight (GTW) and up to 675 lbs.
tongue weight (TW) They are also suitable for use with weight distribution up to 4,500 lbs weight distribution (WD) and 675 lbs.
weight distribution tongue weight (WDTW) DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion The Class 3 trailer hitch has a 2 inch square receiver tube opening, allowing you to attach accessories like a bike rack or cargo carrier, or hook up your pop-up, boat trailer, or utility trailer.
Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards DRAW-TITE: North America’s Favorite Hitch..
Manufactured by: Tekonsha
Tekonsha® Tow Harnesses are the replacement for your factory electrical connector to the back of your vehicle These harnesses are used to link the wiring from your vehicle to the trailer when towing Tekonsha Tow Harnesses feature custom designs to fit each vehicle make and model based on manufacturer specifications.
Plus, the Plug & Play connectors on the end of the wires make it easy to install No cutting or splicing!Tekonsha offers the largest, most complete line of Replacement Tow Harnesses Hit the road with the peace of mind only Tekonsha can provide.
Life's a Journey Stop Often..
Manufactured by: Tow Ready
Mounting Bracket, 7-Way OEM Connectors, Includes Screws and Nuts.
Manufactured by: Tekonsha
The Tekonsha Prodigy P2 electric trailer brake controller is a small device with a big responsibility As one of the most popular and most trusted brake controllers on the market, this proportional brake controller utilizes primary sensor technology to provide a smooth braking response in any stopping situation The Prodigy P2 has an easy-to-use knob so you can effortlessly set the power output to your desired braking power, a boost feature that lets you apply up to three levels of additional braking power, especially when hauling heavier loads, the choice of electric or electric over hydraulic braking, and manual override to help you brake safely when an unexpected stop pops up.
The P2 also has an LED digital display so you can monitor your settings and trailer braking activity and a power-save mode to reduce battery drain when not in use This intuitive brake controller can easily be positioned on top of or under the dash, with your choice of a mounting bracket or mounting pocket and is self-leveling when mounted within a 90-degree vertical range, so there’s no need to adjust the unit once it’s installed When you’re done towing, the P2’s snap-in dash mounting clip, Plug & Play port for two plug adapters, and removeable electrical connector allow the unit to be quickly stored.
The Prodigy P2 truly is a complete trailer brake controller kit It works with trailers with 1-4 axles, comes with all the mounting hardware needed for installation, and is backed by a limited lifetime warranty..
Order today or message us for more information