Manufactured by: Draw-Tite
DRAW-TITE® Class 3 trailer hitches are the perfect mix of style and strength to get you and your equipment wherever you need to go This DRAW-TITE Class 3 receiver hitch is rated for up to 3,500 lbs gross trailer weight (GTW) and up to 400 lbs.
tongue weight (TW) They are also suitable for use with weight distribution up to 4,000 lbs weight distribution (WD) and 400 lbs.
weight distribution tongue weight (WDTW) DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion The Class 3 trailer hitch has a 2 inch square receiver tube opening, allowing you to attach accessories like a bike rack or cargo carrier, or hook up your pop-up, boat trailer, or utility trailer.
Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards DRAW-TITE: North America’s Favorite Hitch..
Manufactured by: Tekonsha
Does your trailer have multiple tail lights or does the tail lights seem dim to you? Then it is possible you need a Modulite® from Tekonsha® The Tekonsha Modulite product line has power modules designed to virtually eliminates additional electrical draw on the vehicle's tail light circuits They help to ensures maximum trailer light brightness for your trailer tail lights.
It powers the trailer's stop, turn, tail and running lights without overloading your vehicle electrical systems..
Manufactured by: Reese Towpower
REESE Towpower dual port adapter offers the most convenient way to up-grade your vehicle from a standard 4-way flat connector to have both the versatility of a 4-way flat along with the capabilities of the 7-way round connector The simple wiring converts the vehicle's 4-way flat to a flexible, two port connector, offering both the 4-way flat, 7-way round connector..
Manufactured by: Tow Ready
Includes all necessary parts required to completely install all brake controls No other parts are necessary..
Manufactured by: Tekonsha
Used in 6, 12 and 24V DC applications Automotive, R.V., air conditioners, battery chargers, any application requiring over-current protection Non-corrosive molded cover eliminates grounding when operating against a fault line.
Includes mounting bracket and installed nuts and washers..
Manufactured by: Tekonsha
The Tekonsha Prodigy P2 electric trailer brake controller is a small device with a big responsibility As one of the most popular and most trusted brake controllers on the market, this proportional brake controller utilizes primary sensor technology to provide a smooth braking response in any stopping situation The Prodigy P2 has an easy-to-use knob so you can effortlessly set the power output to your desired braking power, a boost feature that lets you apply up to three levels of additional braking power, especially when hauling heavier loads, the choice of electric or electric over hydraulic braking, and manual override to help you brake safely when an unexpected stop pops up.
The P2 also has an LED digital display so you can monitor your settings and trailer braking activity and a power-save mode to reduce battery drain when not in use This intuitive brake controller can easily be positioned on top of or under the dash, with your choice of a mounting bracket or mounting pocket and is self-leveling when mounted within a 90-degree vertical range, so there’s no need to adjust the unit once it’s installed When you’re done towing, the P2’s snap-in dash mounting clip, Plug & Play port for two plug adapters, and removeable electrical connector allow the unit to be quickly stored.
The Prodigy P2 truly is a complete trailer brake controller kit It works with trailers with 1-4 axles, comes with all the mounting hardware needed for installation, and is backed by a limited lifetime warranty..
Order today or message us for more information