Manufactured by: Draw-Tite
DRAW-TITE® Class 3 trailer hitches are the perfect mix of style and strength to get you and your equipment wherever you need to go This DRAW-TITE Class 3 receiver hitch is rated for up to 5,000 lbs gross trailer weight (GTW) and up to 500 lbs.
tongue weight (TW) They are also suitable for use with weight distribution up to 10,000 lbs weight distribution (WD) and 1,000 lbs.
weight distribution tongue weight (WDTW) DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion The Class 3 trailer hitch has a 2 inch square receiver tube opening, allowing you to attach accessories like a bike rack or cargo carrier, or hook up your pop-up, boat trailer, or utility trailer.
Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards DRAW-TITE: North America’s Favorite Hitch..
Manufactured by: Draw-Tite
Replacement fastener kit for 3-piece Class III receiver hitches.
Manufactured by: Tow Ready
The Tow Ready 7-Way Connector Harness (Part Number 20147) provides a reliable vehicle-end wiring solution for trailers Measuring 18.25 inches in length, this harness features standard 7-way RVIA clocking, ensuring compatibility with all models The flex tubing design offers enhanced durability and protection for the wiring.
Packaged in a clamshell, it’s easy to handle and install Backed by a limited 3-year warranty, this connector harness is built for long-lasting performance Made in Mexico, it meets quality standards for secure trailer connections, making it an essential addition to your electrical wiring setup..
Manufactured by: Reese Towpower
REESE Towpower electrical T- Connector designed to fit a multitude of today's models offering both a 7-Way connector and a 4-Flat connector The connector is designed to be inserted into the vehicles wiring harness to facilitate a quick and easy plug in installation Easy to follow, detailed instructions are included with every T-Connector to make the installation process as smooth and trouble-free as possible.
Check the fitment guide to see if it fits your model vehicle..
Manufactured by: Tekonsha
The Tekonsha Primus IQ electric trailer brake controller gives you dependable braking power in a compact design As an industry staple for more than ten years, this proportional braking system provides a smooth braking response in any stopping situation With its petite yet durable exterior, this trailer brake controller fits nicely under the dash, making it easily accessible from the driver’s seat without being in the way.
While also compact, the brains of the Primus IQ are astute This insightful brake controller has an easy-to-read LED display, self-diagnostic check to monitor your connection and trailer braking activity and is self-leveling when mounted within a 90-degree vertical range, so there’s no need to adjust the unit once it’s installed It also features a power output knob to set your desired braking power, a boost option that lets you apply up quickly and easily to three levels of additional trailer braking power, especially when hauling heavier loads, and manual override.
The Primus IQ was created to work with electric braking systems, works proportionally in reverse to make backing into tough spots a bit easier, and - like the Prodigy P3, Prodigy P2, and many other Tekonsha brake controllers – utilizes primary sensor technology to ensure the smoothest stop possible When you’re done towing, the IQ’s snap-in dash mounting clip, Plug & Play port for two plug adapters, and removeable electrical connector allow the unit to be quickly stored The Primus IQ is truly a complete trailer brake controller kit.
It works with trailers with 1-3 axles, comes with all necessary mounting hardware, and is backed by a limited lifetime warranty..
Manufactured by: Tekonsha
Tekonsha trailer brake controller harnesses exist to make connecting your brake controller to your vehicle as easy as possible These custom two-plug units are specifically designed to be used with any Tekonsha brake controller The Plug & Play feature on the Tekonsha wiring harnesses makes them easy to install.
Simply plug one end of the harness into the back of your desired Tekonsha brake controller and the other end into the port in your vehicle No cutting, splicing, or taping required.Each wiring harness is made up of four copper wires wrapped with a braided nylon thread to insulate the wires and protect them against nicks, punctures, and elevated temperatures The four-pin Plug & Play connectors on each end of the harness are uniquely designed, with one end to fit each vehicle based on make and model year specifications, while the other end plugs easily into any Tekonsha brake controller.Tekonsha trailer brake controller harnesses are custom designed, giving you plenty of wire to reach between where it is connected to the vehicle and where it connects to the brake controller without stretching or straining the wires.
And because Tekonsha is the leader in wiring and electrical, you can relax knowing your connections will be safe and secure, so you can hit the road with confidence! With Tekonsha, Life’s a Journey Stop Often..
Order today or message us for more information