Manufactured by: Draw-Tite
DRAW-TITE® Class 5 trailer hitches are the choice of professionals and big toy haulers who need to get the job done! These Class 5 heavy-duty hitches are rated for up to 15,000 lbs gross trailer weight (GTW) and up to 1,600 lbs tongue weight (TW).
They are also suitable for use with weight distribution up to 16,000 lbs weight distribution (WD) and 1,600 lbs weight distribution tongue weight (WDTW).
DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion The 2 inch square receiver tube opening, bigger chain loops, tighter ball mount fit, and reinforced pin holes make these heavy-duty hitches ideal for toy haulers and commercial vehicles alike Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty.
DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards DRAW-TITE: North America’s Favorite Hitch..
Manufactured by: Tekonsha
Connect to your lifestyle with a custom hitch receiver from CURT All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Mercedes-Benz C230, C240, C280, C32 AMG, C320, C350, C55 AMG, CLS500, CLS55 AMG, CLS550 and CLS63 AMG (see application info to verify fitment).
The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory This particular class 1 hitch is rated for 2,500 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component).
The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included) It can be mounted in the rise or drop position to promote level towing Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process.
It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation..
Manufactured by: Tow Ready
Mounting Bracket, 7-Way OEM Connectors, Includes Screws and Nuts.
Manufactured by: Tekonsha
The Tekonsha Primus IQ electric trailer brake controller gives you dependable braking power in a compact design As an industry staple for more than ten years, this proportional braking system provides a smooth braking response in any stopping situation With its petite yet durable exterior, this trailer brake controller fits nicely under the dash, making it easily accessible from the driver’s seat without being in the way.
While also compact, the brains of the Primus IQ are astute This insightful brake controller has an easy-to-read LED display, self-diagnostic check to monitor your connection and trailer braking activity and is self-leveling when mounted within a 90-degree vertical range, so there’s no need to adjust the unit once it’s installed It also features a power output knob to set your desired braking power, a boost option that lets you apply up quickly and easily to three levels of additional trailer braking power, especially when hauling heavier loads, and manual override.
The Primus IQ was created to work with electric braking systems, works proportionally in reverse to make backing into tough spots a bit easier, and - like the Prodigy P3, Prodigy P2, and many other Tekonsha brake controllers – utilizes primary sensor technology to ensure the smoothest stop possible When you’re done towing, the IQ’s snap-in dash mounting clip, Plug & Play port for two plug adapters, and removeable electrical connector allow the unit to be quickly stored The Primus IQ is truly a complete trailer brake controller kit.
It works with trailers with 1-3 axles, comes with all necessary mounting hardware, and is backed by a limited lifetime warranty..
Manufactured by: Tekonsha
Tekonsha trailer brake controller harnesses exist to make connecting your brake controller to your vehicle as easy as possible These custom two-plug units are specifically designed to be used with any Tekonsha brake controller The Plug & Play feature on the Tekonsha wiring harnesses makes them easy to install.
Simply plug one end of the harness into the back of your desired Tekonsha brake controller and the other end into the port in your vehicle No cutting, splicing, or taping required.Each wiring harness is made up of four copper wires wrapped with a braided nylon thread to insulate the wires and protect them against nicks, punctures, and elevated temperatures The four-pin Plug & Play connectors on each end of the harness are uniquely designed, with one end to fit each vehicle based on make and model year specifications, while the other end plugs easily into any Tekonsha brake controller.Tekonsha trailer brake controller harnesses are custom designed, giving you plenty of wire to reach between where it is connected to the vehicle and where it connects to the brake controller without stretching or straining the wires.
And because Tekonsha is the leader in wiring and electrical, you can relax knowing your connections will be safe and secure, so you can hit the road with confidence! With Tekonsha, Life’s a Journey Stop Often..
Order today or message us for more information