Draw-Tite Trailer Hitch + 7-Way Wiring + Draw-Tite Activator IV Brake Control For 04-07 Ford Econoline Van All Exc Shuttle Bus DR17DF

DRAW-TITE 41945 Ultra Frame® Class 5 Trailer Hitch, 2 Inch Square Receiver, Black (QTY 1)

Manufactured by: Draw-Tite

DRAW-TITE® Class 5 trailer hitches are the choice of professionals and big toy haulers who need to get the job done! These Class 5 heavy-duty hitches are rated for up to 10,000 lbs gross trailer weight (GTW) and up to 1,500 lbs tongue weight (TW).

They are also suitable for use with weight distribution up to 12,000 lbs weight distribution (WD) and 1,200 lbs weight distribution tongue weight (WDTW).

DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion The 2 inch square receiver tube opening, bigger chain loops, tighter ball mount fit, and reinforced pin holes make these heavy-duty hitches ideal for toy haulers and commercial vehicles alike Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty.

DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards DRAW-TITE: North America’s Favorite Hitch..

REESE TOWPOWER 78058 Wiring Connector, 4-Way Flat Vehicle End, 48 Inch Length Wire (QTY 1)

Manufactured by: Reese Towpower

The REESE Towpower electrical 4-Flat wiring kit is designed for the vehicle end, and includes 48 In of wire with splice connectors The included splices connectors make adding a 4-flat connector easy for most vehicle wiring systems..

REESE TOWPOWER 85343 Wiring Adapter, 7-Way Flat to 4-Way Flat (QTY 1)

Manufactured by: Reese Towpower

REESE Towpower dual port adapter offers the most convenient way to up-grade your vehicle from a standard 4-way flat connector to have both the versatility of a 4-way flat along with the capabilities of the 7-way round connector The simple wiring converts the vehicle's 4-way flat to a flexible, two port connector, offering both the 4-way flat, 7-way round connector..

TOW READY 20506 Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only (QTY 1)

Manufactured by: Tow Ready

Includes all necessary parts required to completely install all brake controls No other parts are necessary..

Used in 6, 12 and 24V DC applications. Automotive, R.V., air conditioners, battery chargers, any application requiring over-current protection. Non-corrosive molded cover eliminates grounding when operating against a fault line. Includes mounting bracket and installed nuts and washers.(QTY 1)

Manufactured by: Tekonsha

Used in 6, 12 and 24V DC applications Automotive, R.V., air conditioners, battery chargers, any application requiring over-current protection Non-corrosive molded cover eliminates grounding when operating against a fault line.

Includes mounting bracket and installed nuts and washers..

Features:

• Current rating: 30 Amp
• Number of terminals: 2
• Voltage compatibility: 6 V, 12 V, 24 V
• Terminal type: Threaded
• Terminal gender: Male

Activator IV Electronic Brake Control for 1 to 4 Axle Trailers; Timed ActuatedCompact design with Up-front push buttons for Sync and OutputIlluminated LED output indicator and front display; view at almost any angleSmooth and simple installation, Plug and Play feature allows quick and easy connection (QTY 1)

Manufactured by: Draw-Tite

Activator® IV Time-Delay Trailer Brake Controller for Trailers with 1-4 Axles.

Features:

• 1 to 4 axle trailers
• Digital output indicator
• Small, compact design
• Up-front push buttons for Sync and Output
• Diagnostics for Overload and Open Ground
• Short circuit protected
• Mounts in any direction
• No leveling required
• Smooth and simple installation
• Plug & Play quick and easy connection
• Attractive point-of-purchase display packaging
• Electric brake type
• Solid-state construction
• Circuit breaker protected
• Plastic housing
• No hydraulic connections

TEKONSHA 303500 Trailer Brake Controller Custom Harness, Vehicle & Brake Control Ends (QTY 1)

Manufactured by: Tekonsha

Tekonsha trailer brake controller harnesses exist to make connecting your brake controller to your vehicle as easy as possible These custom two-plug units are specifically designed to be used with any Tekonsha brake controller The Plug & Play feature on the Tekonsha wiring harnesses makes them easy to install.

Simply plug one end of the harness into the back of your desired Tekonsha brake controller and the other end into the port in your vehicle No cutting, splicing, or taping required.Each wiring harness is made up of four copper wires wrapped with a braided nylon thread to insulate the wires and protect them against nicks, punctures, and elevated temperatures The four-pin Plug & Play connectors on each end of the harness are uniquely designed, with one end to fit each vehicle based on make and model year specifications, while the other end plugs easily into any Tekonsha brake controller.Tekonsha trailer brake controller harnesses are custom designed, giving you plenty of wire to reach between where it is connected to the vehicle and where it connects to the brake controller without stretching or straining the wires.

And because Tekonsha is the leader in wiring and electrical, you can relax knowing your connections will be safe and secure, so you can hit the road with confidence! With Tekonsha, Life’s a Journey Stop Often..